The mechanical performance and a rate-dependent constitutive model for Al3Ti compound

The Al₃Ti compound has potential application in the high temperature structure materials due to its low density, high strength and stiffness. The mechanical behaviors of the material under different loading rates were studied using compression tests. The results indicate that Al₃Ti is a typical brittle material and its compressive strength is dependent on the strain rate. Therefore, a series of rate-dependent constitutive equations are needed to describe its mechanical behaviors accurately. However, it is still short of professional research on the material model for Al₃Ti. In this study, the material model was developed on the basis of JH-2 constitutive equations using the experimental data. The model was then applied in simulating the impact process of Ti/Al₃Ti metal-intermetallic laminate composites so as to validate the established model. Good agreement between simulation and experiment results shows the constitutive model predict the material responses under high rate and large deformation accurately. This work provides more support for the theoretical and numerical research on the intermetallic.     

短消息传送GPS位置数据的高效数据压缩方法

车务管理信息化系统中需要将战车行驶中的运动位置数据通过移动短消息方式定时向管理中心传送。受短消息数据包容量的限制，每条短消息可携带的车辆GPS位置数据量有限。少量的GPS位置数据难以重现车辆运动轨迹，但频繁发送短消息，费用又较高。为满足车辆运行轨迹重现所需大量密集车辆位置数据的需求，提出了一种专用于车辆位置数据压缩传输方法，可使传送数据量提高30多倍，解决了频繁发送车辆位置短消息费用高的问题，已应用到车辆动用管理系统中。     

Ni-Co-P／导电聚苯胺复合材料电磁和红外性能

采用化学镀对高氯酸掺杂聚苯胺（PANI/HClO4）粉体进行Ni-Co-P合金化改性,改性材料磁损耗因子得到提高。进行红外光谱分析,PANI/HClO4在3-5μm和8-14μm 2个大气窗口没有强吸收峰,具有雷达红外隐身兼容特性。     

材料力学性能纳米压入测试仪器发展综述

综述了材料力学性能纳米压入测试仪器的发展现状。阐述了纳米压入测试技术的发展历程;从驱动、载荷测量和位移测量3方面对目前材料力学性能纳米压入测试仪器的基本结构进行了比较分析;介绍了材料力学性能纳米压入测试仪器集成技术,包括影响压入深度测量精度的集成技术、观测技术、大载荷模块和高温试验模块等;最后,对未来材料力学性能纳米压力测试仪器的发展趋势作了展望。     

基于压力测量的发动机汽缸磨损寿命预测方法

对不同摩托小时的某型坦克发动机进行了实车检测试验,采用压力传感器测量了发动机汽缸压缩压力,分析了汽缸压缩压力随发动机使用时间的变化趋势。分析了汽缸套磨损的特点及对发动机使用寿命的影响。针对发动机汽缸磨损的非线性特点,建立了人工神经网络预测模型,实现了对坦克发动机汽缸使用寿命的预测。     

圆柱壳在轴向压力作用下的稳定性和振动特性

利用Hamilton原理得出轴向压力作用下圆柱壳位移增量的动力学方程,推导了方程的解析解。通过数值计算,分析了轴向压力作用下圆柱壳的临界屈曲压力随壳体长度变化的曲线,讨论了壳体几何参数(L,h)变化和轴向力幅值变化对振动频率影响的变化曲线。数值计算结果表明,圆柱壳的临界屈曲压力与失稳模态紧密相关;圆柱壳的自振频率随壳体的长度增加而下降,随壳体的厚度增加而提高;圆柱壳的自振频率和最低频率随轴向压力的增大而下降。     

Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications

Due to notable characteristics, sustainability concept and environmental issues, hybridisation natural with synthetic fibres to fabricate composites have been rapidly gaining market share in different applications (structural, military, aerospace and automotive vehicles). Compression, tension and fatigue tests of various stacking sequences of plain jute/carbon reinforced (PVB) polyvinyl butyral by hot hydraulic press technique were experimentally conducted. Six types of fabricated composites with various constituents (jute, carbon and their hybrids) were fabricated and tested. Notably, fatigue lifetime of hybrids increases with increasing the carbon content relative to the jute fibre content. On the other hand, Jute composites possess high strain compared to pure carbon composite, which gives an overall improvement in mechanical behaviours. Interestingly, H1 hybrid with Carbon/Jute/Carbon sequences offers similar fatigue stiffness behaviour of H3 hybrid with Carbon/Jute/Carbon/Jute sequences when subjected to cyclic loading. Carbon composite (C) exhibited the highest fatigue resistance, whiles jute composite (J) possessed the highest strain and semi brittle trends in both mechanical and fatigue performance. Results concluded that plain jute fibres could partially replace high-cost synthetic carbon fibres to produce more eco-friendly hybrids to be utilised in different composites industries.     

FeAlCrNbB金属间化合物复合涂层的制备与表征

研究开发了一种FeAlCrNbB新型喷涂粉芯丝材,并结合自动化高速电弧喷涂工艺制备了该材料的复合涂层,分析了涂层的常规力学性能、组织结构和油润滑条件下的滑动摩擦磨损性能,并和常规FeAl涂层进行了对比。结果显示:FeAlCrNbB涂层具有相对较高的显微硬度和拉伸结合强度、低的孔隙率,组织致密,形成了由Fe-Al金属间化合物相、氧化物以及少量非晶和纳米晶组成的复合结构,由于这种复合结构的材料特征,使涂层具备较好的耐磨损性能。     

基于视频监控应用的视频压缩

介绍了视频服务器的组成及常见的图象压缩标准,通过深入研究H.263视频压缩算法,提出了基于视频监控应用的三点改进,研究了DCT/IDCT快速算法,并直接采用MMX实现了DCT/IDCT和运动向量估计等大运算量模块,实现了基于H.263的软件监控系统,并在实际中得到较好的应用。